Why SilverHandy 3

Fully automatic process

SilverHandy fully automatically monitors the production process. Different water temperatures, immersion depth of the electrodes and water conductivity values are registered. If the production of high-quality silver colloid solution is no longer guaranteed, SilverHandy stops the process and displays an error message.

Automatic end of process with 25 ppm silver in the water

The process does not need to be monitored with a stopwatch. SilverHandy measures the silver output during the process. After reaching 25 ppm (part per million) of silver in the water, SilverHandy generates an acoustic signal and indicates the end of the process in the display.

3 electrodes

SilverHandy works with three electrodes (two positive and one negative electrode). This speeds up the process by approx. 50%. In addition, the electrodes last longer than with other devices.

Measuring and regulating water conductivity

With this function the water conductivity value can be displayed before the process and set to the optimum 5 microsiemens. This function ensures best results a consistently high-quality solution.

Making silver colloid with tap water

With an emergency function silver colloid can be produced in just 60 seconds. The silver content of the solution is not determined and the quality is poorer than with the normal function. However, this function is very useful when you are on a trip and no demineralized water is available.

This colloidal solution is very useful for water disinfection, for washing salad and fruit and, last but not least, for direct use.

Protection against over current and short circuit

The monitored current flow also protects SilverHandy from short circuits between the electrodes or from overcurrent in water with excessive conductivity.

High process voltage

To ensure an acceptable process time even with pure water at 0 µS, SilverHandy works with 32 volts.

Battery operation or with power supply

SilverHandy 3 is powered by the built-in Li-Ion battery or the charger. One battery charge is sufficient for up to 25 hours of operation. The device can also be operated with the charger supplied.

Produce copper and zinc colloid with the same device

Copper and zinc electrodes are also available for the SilverHandy. This means that copper colloid and zinc colloid can be produced as easily and fully automatically as silver colloid. Detailed manufacturing and application instructions are supplied with the copper and zinc electrodes.

SilverHandy is handy and looks good

SilverHandy has a stylish and functional case.

SilverHandy is a Swiss quality product.

Warranty on material and workmanship: 2 years.